**Please USE DROP-DOWN BOX to make your selection
Sold in 4oz Jars (113g)
Liquid form enamel colours (dry powder) for copper, gold, silver & low carbon steel.
For small items a simple way is to place half a teaspoon of powder into a plastic spoon. Using an eye dropper, add small drops of distilled water until the mixture is the consistency of milk.
Apply to copper with a brush.
Always make sure the powder and water have been stirred right before application as the glass falls out of suspension in the water very quickly.
For larger quantities mix 1/4 cup to 140 grams powder.
The water to powder ratio may be adjusted up or down if needed for your particular project. If the liquid dries out, you can grind it back smooth in a mortar and pestle to reconstitute.
Make sure products is completely dry before firing. For small pieces (less than 2" diameter) fire at 785 C for 1 1/2 to 2 minutes.
For larger items (up to 6" in diameter) fire at 785 Celcius for 2 to 3 minutes.
For much larger work, firing times and temperature should be determined for your specific project.