E6000 Industrial Strength Clear Glue (0.18oz mini tube)

• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and many other materials 
• Dries clear 
• Photo safe 
• Washer/dryer safe 
• Paintable 
• Temperature resistant – unaffected by extreme heat or cold once cured 

Follow these step-by-step directions when using E6000: 

Read directions and test small area before use. 
1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use. 
2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 °F / 10 and 32 °C. However, fully cured adhesive can withstand temperatures from -40 to 180 °F / -40 to 82 °C.
3. Apply directly to surfaces to be bonded or repaired. 
4. Allow 24 hours for curing--Maximum bond strength may not be reached for up to 72 hours. 
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. 
6. Clean uncured adhesive with acetone or citrus-based solvents. 

Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products. Not recommended for any items that come into contact with food, drinking water or animals. Do not dry clean.